Series 1500 HPLC Pump

The Series 1500 HPLC Pump has been designed for analytical to smallscale preparative chromatography applications. The patented low-dead volume pulse damper and dual piston mechanism make this pump virtually pulse-free, and provide unmatched performance for the most demanding applications. The unit provides flow rates from 0.001 to 12.0 mL/min., and is typically suitable for columns from 2 mm to 22 mm ID.

The Series 1500 drive features a linear cam and pressure compensation to provide accurate gradients in the high- or low-pressure mode.

Standard controls include RS-232 serial communication port and Run/Stop inputs, remote frequency and remote voltage controls, real-time pressure monitoring, and constant flow.

The high-performance mechanical design provides accurate pressures to 6000 psi. Includes THREE (3) YEAR WARRANTY.

Available in PEEK or Stainless Steel.

Standard Features & Controls
Dual Self Flushing Pump Heads for Reduced Pulsation Pulse Damper for Reduced Dead Volume Real-time pressure monitoring with upper/lower pressure limits Remote 0-10 volt & remote 0-10 kHz Flow Rate Control Input Simple Front Panel Key Pad Controls with LED Display Autoprime. one button toggles flowrate to maximum for rapid solvent change Motor Stall Detector Dual ball and seat Check Valves for Consistent Flow Performance Prime Purge Valve RS-232 Serial Com Port for Complete Control & Status Monitoring Run/stop Inputs (5 volt TTL type) Stainless Steel or PEEK Fluid Path
Specifications
Flow Rates	0.001 - 12.0 mL/min
Pressure (with pulse damper)	Stainless Steel: 0 - 6,000 psi; PEEK: 0 - 5,000 psi
Pulsation	±.5% @ 1mL/min and 1,000 psi
Pressure Accuracy	±1% of full scale pressure
Flow Accuracy	±2%
Flow Precision	0.2% RSD
Dimensions	6" H x 11" W x 18" D (15 x 26 x 46 cm)
Weight	30 lbs (14 kg)