Prep 24 or Prep 100 Preparative Pump

The Prep Pumps have been specifically designed for Preparative Chromatography applications. The units provide high flow rates and high pressure capabilities, with consistent performance to minimize the potential for column damage.

The units deliver a maximum flow rate of 24 or 100 mL/min. at pressures to 6000 psi.

Standard controls include RS-232 serial communication port, Run/Stop inputs and remote frequency & voltage controls. Real-time pressure monitoring with user selectable upper & lower pressure limits is standard. The Prep pumps offer easy solvent changeover and priming capability. Piston wash and simple seal change keep maintenance costs down.

Includes THREE (3) YEAR WARRANTY.

Available in PEEK or Stainless Steel Tubing.

• Prep 100 Preparative Pump
• Prep 24 Preparative Pump

 

Standard Features
Stainless Steel or PEEK Fluid Path Flushing Pump Heads and Prime Purge Valve In-line Electronic Pressure Transducer Simple Front Panel Keypad Controls with LED Display (0.1 mL increments) Autoprime™ one button toggles flow rate to maximum for rapid solvent change Motor Stall Detector Lo-Pulse Pulse Damper for Reduced Pulsation
Specifications
Flow Rates	0.1 - 24.0 ml/min Prep 24 0.1 - 100.0 ml/min Prep 100
Maximum Pressure	6000 p.s.i. Prep 24 4000 p.s.i. Prep 100
Pulsation	± 1% @ 100 mL/min and 3000 psi
Pressure Accuracy	±2% of full scale pressure
Flow Accuracy	± 2%
Flow Precision	0.5% RSD
Controls	RS-232 Serial Com Port for Complete Control & Status Monitoring Run/Stop Inputs (5 volt TTL type) Remote 0-10 volt & remote 0-10 kHz Flow Rate Control Input
Physical	10.375" wide x 17.5" deep x 5.5" high, 35 lbs. 26.35 x 44.45 x 14 cm, 16 kg.