SPD-10AVvp UV/VIS Detector

The SPD-10AVvp UV/VIS Detector is in good condition and tested at GenTech. It offers the highest in detector sensitivity and lowest noise level available to ensure reliable peak detection over a wide range. Includes instruction manual and THIRTY (30) DAY WARRANTY.

• Light source: Deuterium lamp, tungsten lamp
• Wavelength range:
  - 190 ~ 600 nm
  - 190 ~ 370 nm (deuterium lamp)
  - 371 ~ 900 nm (tungsten lamp)
• Spectral bandwidth: 8 nm
• Wavelength accuracy: ± 1 nm
• Wavelength reproducibility: ± 0.1 nm
• Cell path length: 10nm
• Cell volume: 8ul
• Cell pressure tolerance: 12MPa
• Dual wavelength mode:
  - Measurement wavelength: Selectable, two wavelengths in 190- 370 nm, 371-700 nm or 701 - 900 nm range
  - Sampling frequency: 1.2 sec for one wavelength
• Response: Selectable in 10 steps corresponding to time constant 0.05, 0.5, 1.0, 1.5, 1.0, 1.5, 2.0, 3.0, 6.0, 8.0, 10.0 seconds
• Range: Can be set between 0.0001 and 2.56 AUFS in 0.0001 AUFS steps
• Zero adjustment: Auto zero function, baseline shift function
• Wavelength scanning function: Performs wavelength scanning with flow stopped. Data stored in three files, one of which stores background. Background is subtracted from sample scans. File data is not saved up (lost when power is turned OFF).
• Time Program: Available in detector or by system controller
  - Set items: Wavelength ( including dual wavelengths), auto zero, range, marker, response, wavelength scanning, event, polarity, lamp ON/OFF, loop
  - Number of steps: Maximum 32 steps
• Output
  - Output for Recorder: 10 mV
  - Output for Integrator: 0.5, 1, 2, 4, 1.25, 2.5 AU/V in 6 steps